Tray Cables, new UL and CSA certifications

With our new Tray Cables you can expand your range of applications in compliance with the application requirements defined by major North American regulations and specifically: NFPA 79, Art. 336, 392 and 501 of NFPA 70 (NEC) and Table 19 of CSA C22.1 (CE Code). Thanks to the new approvals and the high performance, the TC Series 8110 for fixed installation and the TC Series 8410 for dynamic applications are used for power, control and signal circuits, in cable trays, in raceways, direct buried, in Hazardous Locations Class I/II/III Division 2 and in all industrial environments even when not mechanically protected.

Some of the main features of our cables:
• TC Certification “Tray Cable” for applications in USA and Canada covered by NFPA 70 (NEC), NFPA 79, CSA C22.1 (CE Code).
• CIC Certification “Not-armored Control and Instrumentation Cable” for applications covered by CSA C22.1 (CE Code).
• ER Certification “Exposed-Run” for installations* not mechanically protected.
• Direct-Burial Certification according to UL 1277 for underground installations*.
• Approved AWM I/II A/B and AWM Style 21179 for voltages up to 1000V.
• Flame resistance class FT4 (Vertical Flame Test) for applications in cable trays. •    Use in Hazardous Locations Class I/II/III, Division 2 according to NFPA 70 (NEC) and CSA C22.1 (CE Code).
• Suitable for industrial environments even in the presence of moisture.
• Oil-resistant highly flexible jacket.
• (UL) Listed for USA (CCN.File# QPOR.E361258) and c(UL) Listed for Canada (CCN.File# QPOR7.E361258).

Download the datasheet of our TC-ER/MTW/CIC cables for fixed applications (Series 8110 unshielded and Series 8110S shielded) and, if your application requires speed up to 180 m/min can use our TC-ER/MTW/CIC (Series 8410 unshielded and Series 8410 shielded).

* Each type of installation must still be in accordance with any local regulations and requirements that may be present for the specific application.