Tray cables

April 6, 2014 in New products

The TC-ER/MTW (Tray Cable – Exposed Run / Machine Tool Wire / Direct Burial) Series 8110 and 8410 cablesare an extremely beneficial solution for equipment, machinery and plant for the U.S. and Canadian markets. These cables are in fact manufactured specifically for the uses defined by the ANSI/NFPA 79 and ANSI/NFPA 70 “National Electrical Code” (NEC), and therefore they meet the requirements of the American standards.

The TC-ER/MTW cables are UL Listed, UL Recognized and IEC and they are suitable for dynamic application in power chains, on moving parts of machinery or for static applications on machine and equipments. The ER (Exposed Run) classification allows installation of series 8110 and 8410 cables without the use of protections such as conduits and metal sheaths.

– High flexible Oil-Resistant jacket.
– Suitable for indoor environments even in the presence of humidity.
– The cables for static applications are Direct Burial (UL 1277) certified, they can be laid in the ground without the use of any conduit.
– Approved for not protected installations with consequent cost savings (up to 40% *).
– Suitable for use in Class I, Division 2 Hazardous Locations.
– Blacks numbered conductors for easy identification.
– Voltages up to 1000V (AWM).
– Sections up to 50 sq. mm and up to 25 conductors.
– UL Listed (File number E361258) and UL Recognized Style 21179.

Visit the UL Listed cables page of our web site.

* Comparison performed considering TC-ER cables installed exposed and UL Recognized cables in protective sheaths.

Leave a Reply

Switch The Language